Victory V4 Kraken Guitar Amp
4 in stock.
For credit card payment - Choose Simplify Commerce at checkout
Four valves in the front end, 180-watt power section, two channels, reverb and Two Notes technology.
Only 1.7kg / 3.75lbs – all the Kraken tone in a small box!
The V4 The Kraken guitar amp partners a V4 Series all-valve preamp with a solid-state, 180-watt Class D power amp. Building on the success of the V4 The Duchess, the V4 Kraken guitar amp continues the ultra-compact size and huge tones by adding even more features. The V4 Kraken guitar amp features Two notes audio engineering Torpedo-embedded DynIR Virtual Cabinet technology making it so easy to godirect to FOH, headphones or your audio interface.
A word from Martin Kidd, Victory's Chief Designer...
“After the success of the V4 Duchess Guitar amp, the Victory amps community kept asking ‘Where is a Kraken version?’
We wanted the V4 Kraken Guitar amp to have all the best bits of the range in a package that you could take with you everywhere!
With the V4 Kraken, we wanted to give Kraken fans the best possible experience we could. The V4 Kraken Guitar amp has a V4 preamp front end, a 180 Watt Class D power section, digital reverb, an effects loop and three band EQ.
Also, we are excited to say we have teamed up with our friends at Two notes audio engineering to add their technology into the amp so you can carry your Virtual Cabinets with you and recall your six favourites from the 6 switch preset wheel. This makes the V4 Kraken Guitar amp versatile and perfect for use at home, on the road or in the studio.”
GAIN 1 & 2
The V4 Kraken Guitar amp has two channels. Gain 1 is a slightly looser more ‘vintage’ British-inspired gain sound. Gain 2 is tighter in the bass with a more cutting midrange character and, of course more drive.
Powerful bass, middle and treble controls to shape your tone. These also have an effect on the gain character and drive levels – just like in any valve guitar amp.
Lush sounding digital reverb gives you ambience aplenty. Run it low for a subtle feeling of space, or max it out for washy, splashy hugeness! The reverb is foot-switchable using a TRS cable (sold separately).
TWO NOTES TECHNOLOGY
Two Notes Audio engineering Torpedo-embedded DynIR Virtual Cabinet technology is onboard the Kraken. The Cab Sim XLR makes is super easy to take you Victory virtual cabinets anywhere.
SERIES EFFECTS LOOP
Sits between the preamp and power amp. Run your time-based effects here for maximum clarity.
BALANCED LINE OUT
Send a direct feed to a separate speaker simulator, front of house or wherever you like. Can be used with or without a speaker connected.
Want to power some extra pedals and stick this on your board? We've included a 9V DC centre-negative output that will put out a maximum of 500mA. This is more than enough for the vast majority of drives, fuzzes and analogue delays and so on.
Speaker choice is critical with V4 The Kraken Guitar Amp
V4 The Kraken can put out a staggering 180 watts at 4-ohms (through the Victory V112 Neo cabinet, for example). However, 4-ohm speaker cabs aren’t exactly common, and nor are single speakers that can take 180 watts, so please proceed with caution with a 4-ohm load.
The nature of Class D, solid-state power sections such as this means that the amp’s output is dependant on the speaker load. If you use a more common 8-ohm cab, output power drops to approximately 90 watts. 16-ohms gives you a still-very-healthy 45 watts.
The principle reason we went with the 180-watt output is because lower-powered solid-state devices can run out of volume and headroom very quickly once you get to 8- and 16-ohm loads.
No such problem here: there’s plenty of power no matter what cab you use.
V4 THE KRAKEN GUITAR AMP - TECH SPEC & INFO
Format: Guitar amplifier head
Preamp valves: 1 x EC900, 3 x CV4014
Power output:180W @ 4 ohms (approx 90W @ 8 ohms, 45W @ 16 ohms)
Power requirements:Mains IEC
Size: 258(w) x 174(h) x 105mm(d) inc feet & knobs
Weight: 1.7kg (3.75lbs)
Two Notes Cab Sim Technology with 6 position preset control
Three band EQ
Series FX loop
Balanced DI out on TRS 6.3mm jack
Additional 9V DC power outlet for pedals etc (maximum total current 500mA, centre-negative)